|
Sensitrac.com
Mounting
System for Assistive Technology
|
Below, briefly explains how our system works
Please take 1 minute to read it
|
1. |
All our mounting systems come with the exclusive
Sensitrac on/off slider on the end of the mount for
easy / fast change of assistive technology devices
|
2. |
Simply remove the Slider from the end of the mount
and attach it to the device you are going to mount,
using the new exclusive strong Velcro TX9 that we
included. Then slide the device with the slider on the
back onto the mount. Then LOCK it on with finger lock.The special strong Velcro TX9 was designed exclusively
for heavy assistive technology devices
|
3. |
All of the Sensitrac mounting devices adjust to various angles, depending on the needs of the user.
Rotate 360° around or 180° up and down and then lock it in place by hand.
|
PLEASE SCROLL DOWN TO SEE ALL THE PRODUCTS |
|
|
|
Click HERE to see it work
360° Adjustable Arm
with Sensitrac Pad Base
#SFP/ AA $119 |
Click HERE to see it work
180° Flipper Arm
with Sensitrac Pad Base
# SFP/ F $95 |
Click HERE to see it work
Sensitrac Pad Suction base
Hard Cover w/Velcro TX9 Hook
6" inch x 6" inch #SFP $ 49
|
|
|
|
Sensitrac Desk Mount
with 7" Arm that adjust
360° around and 180° up down
w/ Sensitrac Pad Base
#SDM-7 $450
Holds 8 lbs
|
Sensitrac Desk Mount
with 4" Arm that adjust
360° around and 180° up down
w/Sensitrac Pad Base
#SDM-4 $425
Holds 10lbs |
Sensitrac Front Panel
with Daessy Base
for devices with
Daessy Mounting Plate
#SSDB $ 175
|
|
|
|
Sensitrac Desk-Tray Arm
with 7" Arm that adjusts
360° around and 180° up down
Includes Super Clamp for easy
relocation and strong holding.
# SDTA - 7 $395
Holds 8 lbs |
Sensitrac Desk-Tray Arm
with 4" Arm that adjusts
360° around and 180° up down
Includes Super Clamp for easy
relocation and strong holding.
# SDTA - 4 $389
Holds 10lbs |
Sensitrac Adaptor Panel
Standard Sensitrac Slider
w/Strong TX9 Velcro Hook.
Fits into end of Magic Arm
and spin lock to angle.
# SAP $89
Click HERE to see it work
|
|
|
|
Wheelchair 7" Arm
Wheelchair Only
plus exclusive Super Clamp
with Steel Grip Teeth
Holds 6lbs
#SDTA-W7 $495.00 |
Wheelchair 4 "Arm
Wheelchair Only
plus exclusive Super Clamp
with Steel Grip Teeth
Holds 8 lbs
#SDTA-W4 $475 |
Clamp with Steel Teeth
NOT available separately
Photo is for showing where
the steel teeth are located
Rubber teeth are replaced
with Steel Grip Teeth
|
|
|
Wheelchair Mount Slider Panel
rotates 360° around 180°up/down |
To Increase Height 3" , use the extra Neck in
the package. Release Elbow……Insert Neck
Increase height is not for everyone!
Please test 1st |
